守护高温防护 “软铠甲”—— 陶瓷纤维布保养须知
作者： | 时间：2026-07-20 14:41:10
防潮存放是关键。
请置于干燥、通风、阴凉处，避免雨淋、受潮与长期暴晒。潮湿会导致纤维结块、性能下降，暴晒易加速老化。建议卷装或平放，用防潮膜包裹，远离酸碱、油污、化学品及尖锐硬物，防止腐蚀、刮破与挤压变形。
规范使用防损伤。
避免强力拉扯、反复弯折与过度摩擦，高温工况下纤维韧性降低，更需轻装轻用。严禁超温服役，防止布体烧损、粉化。接触熔渣、火花、高温飞溅物时，可增设防护层，减少直接冲击。安装固定要牢固，防止松动脱落影响防护。
科学清洁保性能。
日常以干扫、轻擦为主，可用软毛刷或压缩空气除尘，尽量不水洗。确需清洁，用少量清水轻拭后立即晾干，严禁浸泡、揉搓、机洗。油污、化学品残留需及时处理，避免侵蚀纤维结构。
定期检查早更换。
常态化检查布面是否破损、掉渣、变硬、变色，一旦出现防护失效迹象，立即更换，杜绝 “带病使用”。高温使用后的纤维布强度降低，拆装更需轻柔，减少二次磨损。
用心保养，长效护航！做好防潮、防压、防腐、防粗暴使用，让陶瓷纤维布始终稳定发挥耐高温、防火隔热性能，为安全生产与可靠防护保驾护航。
Protect Your High-Temperature Protective "Soft Armor" – Maintenance Guidelines for Ceramic Fiber Cloth
Ceramic fiber cloth features high temperature resistance, heat insulation, flame retardancy and flexibility. It is a core material for industrial thermal insulation, fire sealing, welding protection and new energy safety applications. Proper maintenance can greatly extend its service life, guarantee protective performance and reduce potential safety hazards.
Prioritize Moisture-Proof Storage
Store the cloth in a dry, ventilated and cool area, away from rain, dampness and prolonged sunlight exposure. Moisture will clump fibers and degrade performance, while direct sunlight accelerates aging. Roll or lay the cloth flat and wrap it with moisture-proof film. Keep it far from acids, alkalis, oil stains, chemical agents and sharp hard objects to avoid corrosion, scratches and deformation caused by compression.Standardize Operation to Prevent Damage
Avoid forceful pulling, repeated bending and excessive friction. Fibers become less flexible under high-temperature working conditions, so handle with care during installation and use. Never operate the cloth beyond its rated temperature, otherwise the fabric will burn and pulverize. When exposed to molten slag, sparks and high-temperature splashes, add an extra protective layer to mitigate direct impact. Secure the cloth firmly after installation to prevent displacement, which would impair its protective functions.Adopt Scientific Cleaning Methods to Preserve Performance
For daily cleaning, gently sweep or wipe the cloth with a soft brush or compressed air; washing is not recommended. If cleaning is necessary, dab lightly with a small amount of clean water and dry immediately. Do not soak, knead or machine wash the cloth. Promptly remove residual oil stains and chemical contaminants to prevent erosion of the fiber structure.Conduct Regular Inspections and Timely Replacements
Routinely check the cloth surface for cracks, fiber shedding, hardening and discoloration. Replace the cloth right away once signs of failed protection appear; never continue using damaged products. Ceramic fiber cloth loses tensile strength after high-temperature exposure, so disassemble and install it gently to minimize secondary wear.Diligent maintenance delivers long-lasting protection. By keeping the cloth dry, free from compression, chemical corrosion and rough handling, you can maintain its stable high-temperature resistance and thermal insulation performance, providing reliable safeguards for safe industrial production.
